- English
- فارسی
International Conference Papers
1- A.M.Parvanian, M.Saadatfar, M.H. Shahzeydi, M. Panjepour
" Pore engineering of copper foams made by space holder technique through XMCT characterization ", 2nd International Conference on Tomography of Materials and Structures, ICTMS 2015, Québec, Canada, June 29th – July 3rd
2- A.M.Parvanian, M. Panjepour
Development of Open-pore Copper Foams for Application as Bipolar Plates of PEMFC Stack", The 2nd Hydrogen and Fuel Cell Conference, K. N. Toosi University of Technology Tehran, Iran, 2012/5
3- M. Zafari, M. Panjepour , M. Meratian
" SIMULATION OF FLOW THROUGH OPEN CELL COPPER FOAMS
USING MICROTOMOGRAPHY STRUCTURE", The Proceedings of the 1st International Porous and Powder Materials Symposium, Çeşme Izmir-TURKEY, 3-6 September 2013
4- M.H. Shahzeydi1, M. Panjepour
" PRODUCTION OF COPPER FOAM BY CARBAMIDE SPACE HOLDER ", The Proceedings of the1st International Porous and Powder Materials Symposium, Çeşme Izmir-TURKEY, 3-6 September 2013
5- M. Naghdi, M. Panjehpour and G.R Aryanpour
" Tracing the effects of temperature on diffusion controlling regime by system collisions", 3rd International Conference on Porous Media -BORDEAUX - March 29th -31st, 2011.
6- A.M. Parvanian, M. Panjepour, M. Meratian and M. Sanayei
" Reclamation of Metal Matrix Composite Scraps Production of Cellular Composite Materials", The 2nd International Conference on Composites: Characterization, Fabrication and Application(CCFA-2), Kish Island, Iran, December 27-30, 2010.
7- M. Sanayei, , M. Meratian, M. Panjepour and A.M. Parvanian
" Synthesis of Particulate in Situ Aluminum – Alumina Composite by using Aluminothermic Reactions", The 2nd International Conference on Composites: Characterization, Fabrication and Application(CCFA-2), Kish Island, Iran, December 27-30, 2010.
8- M. Hedayati, R. Bagheri, M. Salehi, , M. Panjepour
" Chemical Surface Modification of Precipitated Silica Nanoparticles Using 3- Glycid oxy propyl tri ethoxy silane by Deposition from Aqueous Alcohol", 3rd Conference on Nanostructures, Kish Island, I. R. Iran, March 10-12, 2010.
9- Y. Hashemzadeh, M. Salehi, R. Bagheri, M. Panjepour
" Prepration and Charactrization of Acrylic-based Polyurethane/Nanosilica Composite Coating", 3rd Conference on Nanostructures, Kish Island, I. R. Iran, March 10-12, 2010.
10- M. Salehi, M. Panjepour, R. Bagheri, Y. Hashemzadeh
" Rheological and Optical Properties of Acrylic-based Polyurethane/Precipitated Nanosilica Composite Coatings”, International Congress on Nanoscience and Nanotechnology, Shiraz University, Shiraz, Iran, 9-11 Nov 2010.
11- F. Tehrani, M.H. Abbasi, M.A. Golozar, M. Panjepour
" The Effect of Particle Size of Iron Powder on α to γ Transformation in the Nanostructured High Nitrogen Fe–Cr–Mn Stainless Steel Produced by Mechanical Alloying", 2th International Conference on Ultrafine Grained and Nanostructured Materials, Tehran, Iran, November 14-15, 2009.
12- F. Mirshahi, M. Meratian and M. Panjepour
" Effect of Cooling Rate on Morphology and Distribution of Precipitated Mg2Si Particles in Mg/Mg2Si Composite", 8th International Conference on Magnesium Alloys and their Applications (DGM), October 26-29, Weimar, Germany, 2009.
13- A. Maleki, B. Niroumand, M. Meratian, M. Panjepour
" Optimization of Reactants Ratio in Aluminothermic Reaction of Aluminum and Zinc Oxide", Conference of Metallurgists (COM), SUDBURY, ONTARIO, August 23-26, 2009.
14- M. Fourjanizadeh, M. Panjepour and M. Meratian
"Synthesis of Elevated-temperature Iron Aluminde Intermetallic Powders by Novel Hot Ball Milling Method", Iran International Aluminum Conference (IIAC), Tehran, I.R. Iran, April 22-23, 2009.
15- S. Sadeghi, M. Davazdah Emami and M. Panjepour
" A 2D Axismmetric Modeling of Combustion in a Packed Bed of Sinter Materials", The 17th Annual International Conference on Mechanical Engineering (ISME), University of Tehran, May 19-21, 2009.
16- A. Maleki, M. Meratian, B. Niroumand, M. Gupta, M. Panjepour
“ Effect of Reactants Ratio on Microstructure of In-situ Processed Aluminum / Alumina Composite”, 1 st International Conference on Composites, Characterization, Fabrication, and Application(CCFA-1), Kish Island, Iran, December 15-17, 2008.
17- M. Ghasri Khozani, M. Meratian and M. Panjepour
" Fabrication of Al- Al2O3 in Situ Particle Composite by Decomposition of Aluminum Sulphate ", Proceedings of The Eightieth International Seminar, Iranian Institute of Aerospace, Sharif University of Technology, Tehran, Iran, 19-21 Feb, 2008, pp. 197-198
19- M. Samadi, M. Shamanian, M. Panjepour, A. Saidi, M. H. Abbasi and F. Asgharzadeh
"Investigation of MoSi2 Formation in the Presence of Copper by Self Propagation- High Temperature – Synthesis ", International Symposium for Research Scholars on Metallurgy (ISRS), Indian Institute of Technology Madras, Chennai, 18-20 Dec, 2006, pp.71-80.
20-A. Jafarizadeh, M. Panjepour, M. Meratian, M.Davazdah Emami,
'Investigating the effect of pore size on fluid flow in aluminum-based porous catalysts using CFD' , 7th International Conference on Materials Science & Metallurgical Engineering (iMat2016), 8-9 NOV, 2016.
21-E. Reasi, M. Panjepour,M. Meratian, M.Davazdah Emami,
'Computainal of mass transfer coefficient in catalytic foams using CFD', 7th International Conference on Materials Science & Metallurgical Engineering (iMat2016), 8-9 NOV, 2016.
22-P. Azizi, M. Panjepour,M. Ahmadian
'Investigating the formation of molybdenum disilicide intermetallic compounds in the presence of aluminum and zirconium elements', 7th International Conference on Materials Science & Metallurgical Engineering (iMat2016), 8-9 NOV, 2016.
23- H. Naghdi, M. Panjepour, M. Meratian,
'Synthesis of molybdenum disilicide intermetallic by combustion synthesis process', 7th International Conference on Materials Science & Metallurgical Engineering (iMat2016), 8-9 NOV, 2016.
24- Keivan Sarmadi, M.Panjepour
'Investigating the effect of leaching process on the removal of impurities in silica ore', 7th International Conference on Materials Science & Metallurgical Engineering (iMat2018), 13-14 December, 2018.
25- Fatemeh Shamoradia, Masoud Panjehpoura, Rahmatollah Emadi
'FABRICATION OF CARBON-CARBON NANOFIBER COMPOSITE
FOAM BY CHEMICAL VAPOR INFILTRATION METHOD', 4thinternational porous powder materials conference, 9-11 september, 2019.
26-M.Ali Ahmadzadeh, A.Jafarizadeh, M.Panjepour
'Modeling of fluid flow in porous catalysts base aluminum with simulated using computational fluid dynamics and linear regression methods', 10th International Conference on Materials Science & Metallurgical Engineering (iMat2021), 16-17 Nov, 2021.
27-M.Ali Ahmadzadeh, A.Jafarizadeh, M.Panjepour
'Prediction of pressure gradient in porous catalyst base using a combined model of computational fluid dynamics and machine learning methods', 11th International Conference on Materials Science & Metallurgical Engineering (iMat2022), 13-14 December, 2022.